.. DO NOT EDIT. .. THIS FILE WAS AUTOMATICALLY GENERATED BY SPHINX-GALLERY. .. TO MAKE CHANGES, EDIT THE SOURCE PYTHON FILE: .. "api/gallery/large_scale/plot_kpm_optical_hall_conductivity.py" .. LINE NUMBERS ARE GIVEN BELOW. .. only:: html .. note:: :class: sphx-glr-download-link-note :ref:`Go to the end ` to download the full example code. .. rst-class:: sphx-glr-example-title .. _sphx_glr_api_gallery_large_scale_plot_kpm_optical_hall_conductivity.py: The Optical Hall Conductivity of a Disordered Chern Insulator ===================================================================== The full optical conductivity tensor of a sample with no Brillouin zone, from the kernel polynomial method. With two velocities, the Kubo-Greenwood trace :math:`j_{ab}(E_1, E_2) = \mathrm{Tr}[v_a\,\delta(E_1-H)\,v_b\,\delta(E_2-H)]` is complex, and .. math:: \sigma_{ab}(\omega) = \frac{e^2}{\hbar}\left[\pi S_{ab}(\omega) + i\,\mathrm{P}\!\!\int d\nu\,\frac{S_{ab}(\nu)}{\omega-\nu}\right]\, ,\qquad S_{ab}(\nu) = \frac1\Omega\int dE\,j_{ab}(E+\nu, E)\,\frac{f(E)-f(E+\nu)}{\nu}\, , the absorptive part from the transitions at :math:`\hbar\omega` and the reactive part from all of them (Kramers-Kronig), both from the same Chebyshev moments (:func:`tbkit.kpm.optical_conductivity` with *vel_b* and ``part='complex'``; KITE's ``conductivity_optical``). Here: a Haldane model (:math:`t_2 = 0.2t`, :math:`\phi = \pi/2`, :math:`M = 0.3t`) on a :math:`60\times60` torus, 7,200 sites. Below the gap, :math:`\mathrm{Re}\,\sigma_{yx}(\omega\to0)` is the Chern number (TKNN), the Hall conductance that the Faraday and Kerr rotations of a thin film measure at finite frequency, and the reactive :math:`\mathrm{Im}\,\sigma_{xx}` is negative (a capacitive response, no absorption). Anderson disorder leaves the low-frequency plateau at :math:`C` and smears out the absorption edge. .. GENERATED FROM PYTHON SOURCE LINES 30-67 .. code-block:: Python import numpy as np import matplotlib.pyplot as plt import tbkit.kpm as kpm import tbkit.lattices as lattices import tbkit.optics as optics from tbkit.kspace import KSpace t, t2, m = 1., 0.2, 0.3 hal = KSpace(lattices.honeycomb()) hal.set_hopping([{'i': 0, 'j': 1, 'R': R, 't': t} for R in [(0, 0), (-1, 0), (0, -1)]]) for R in [(0, 1), (-1, 0), (1, -1)]: hal.set_hopping([{'i': 0, 'j': 0, 'R': R, 't': 1j * t2}, {'i': 1, 'j': 1, 'R': R, 't': -1j * t2}]) hal.set_onsite({'a': m, 'b': -m}) chern = hal.chern_number([0]) gap = 2 * (3 * np.sqrt(3) * t2 - m) # at the Dirac point where M and the Haldane mass compete print('Chern number of the lower band: {:.3f}, gap {:.3f}t'.format(chern, gap)) assert abs(chern - 1.) < 1e-6 n = 60 area = n * n * optics.cell_area(hal) vx, vy = hal.finite_velocity(n, periodic=True, sparse=True) omega = np.linspace(0.05, 4.5, 90) def torus(w, seed=0): ham = hal.finite_ham(n, periodic=True, sparse=True).tolil() ham.setdiag(ham.diagonal() + np.random.default_rng(seed).uniform(-w / 2, w / 2, 2 * n * n)) return ham.tocsr() def tensor(ham): kw = dict(n_moments=256, n_random=24, seed=1, area=area, part="complex") return (kpm.optical_conductivity(ham, vy, omega, vel_b=vx, **kw), kpm.optical_conductivity(ham, vx, omega, **kw)) .. rst-class:: sphx-glr-script-out .. code-block:: none Chern number of the lower band: 1.000, gap 1.478t .. GENERATED FROM PYTHON SOURCE LINES 68-78 The clean torus against the Brillouin zone ------------------------------------------ Below the gap, where neither broadening (the Jackson kernel, the Lorentzian :math:`\eta = 0.04t`) matters, the torus gives the Brillouin-zone Kubo formula of :func:`tbkit.optics.optical_conductivity`: the Hall plateau :math:`\mathrm{Re}\,\sigma_{yx} \to C` as :math:`\omega\to0`, rising towards the gap, and the reactive :math:`\mathrm{Im}\,\sigma_{xx} < 0`, with no absorption (:math:`\mathrm{Re}\,\sigma_{xx}`) and no circular dichroism (:math:`\mathrm{Im}\,\sigma_{yx}`). .. GENERATED FROM PYTHON SOURCE LINES 78-97 .. code-block:: Python yx, xx = tensor(torus(0.)) bz_yx = optics.optical_conductivity(hal, omega, eta=0.04, nk=300, component='yx') bz_xx = optics.optical_conductivity(hal, omega, eta=0.04, nk=300) print('Re sigma_yx(w = {:.2f}) = {:.4f} e^2/h'.format(omega[0], yx[0].real)) assert abs(yx[0].real - chern) < 0.02 below = omega < 0.8 * gap print('below the gap: largest deviation from the Brillouin zone {:.1%} (Re sigma_yx), {:.1%} (Im sigma_xx)' .format(np.max(np.abs(yx[below].real / bz_yx[below].real - 1.)), np.max(np.abs(xx[below & (omega > 0.2)].imag / bz_xx[below & (omega > 0.2)].imag - 1.)))) assert np.allclose(yx[below].real, bz_yx[below].real, rtol=0.03) assert np.allclose(xx[below & (omega > 0.2)].imag, bz_xx[below & (omega > 0.2)].imag, rtol=0.05) assert np.all(xx[below].imag < 0) assert np.all(np.abs(xx[below].real) < 0.01) and np.all(np.abs(yx[below].imag) < 0.01) # above the gap: absorption, and dichroism (the two circular polarizations # are absorbed differently, Im sigma_yx != 0) above = omega > 1.2 * gap assert np.max(xx[above].real) > 1. and np.max(np.abs(yx[above].imag)) > 1. .. rst-class:: sphx-glr-script-out .. code-block:: none Re sigma_yx(w = 0.05) = 1.0097 e^2/h below the gap: largest deviation from the Brillouin zone 2.2% (Re sigma_yx), 3.1% (Im sigma_xx) .. GENERATED FROM PYTHON SOURCE LINES 98-104 Disorder -------- Box disorder :math:`W = 1.5t`, less than the gap: the Hall plateau stays at :math:`C` (a topological invariant, as long as the mobility gap stays open), while the absorption edge is smeared below :math:`\omega = \Delta`: the disorder broadens the band edges into the gap. .. GENERATED FROM PYTHON SOURCE LINES 104-131 .. code-block:: Python yx_d, xx_d = tensor(torus(1.5)) print('disordered: Re sigma_yx(w = {:.2f}) = {:.4f} e^2/h'.format(omega[0], yx_d[0].real)) assert abs(yx_d[0].real - chern) < 0.02 # (the kernel itself rounds the clean edge over the last ~15% below the gap) edge = (omega > 0.7 * gap) & (omega < 0.85 * gap) print('absorption at 0.7-0.85 of the clean gap: {:.3f} (clean), {:.3f} (disordered)'.format( xx[edge].real.mean(), xx_d[edge].real.mean())) assert np.all(xx[edge].real < 0.01) assert xx_d[edge].real.mean() > 10 * xx[edge].real.mean() fig, (ax1, ax2) = plt.subplots(1, 2, figsize=(10, 4)) for ax, (k, b, d), name in ((ax1, (yx, bz_yx, yx_d), 'yx'), (ax2, (xx, bz_xx, xx_d), 'xx')): for part, ls in ((np.real, '-'), (np.imag, '--')): label = 'Re' if part is np.real else 'Im' ax.plot(omega, part(b), color='0.6', lw=4, ls=ls, label=label + ', Brillouin zone') ax.plot(omega, part(k), 'b', ls=ls, label=label + ', KPM') ax.plot(omega, part(d), 'r', ls=ls, label=label + r', KPM, $W = 1.5t$') ax.axvline(gap, color='k', lw=0.8, ls=':') ax.axhline(0., color='k', lw=0.5) ax.set_xlabel(r'$\hbar\omega/t$') ax.set_ylabel(r'$\sigma_{%s}\ (e^2/h)$' % name) ax1.axhline(chern, color='k', lw=0.8, ls='--') ax1.set_title(r'Optical Hall conductivity $\sigma_{yx}$') ax2.set_title(r'Longitudinal $\sigma_{xx}$') ax2.legend(fontsize=7) fig.set_layout_engine('tight') .. image-sg:: /api/gallery/large_scale/images/sphx_glr_plot_kpm_optical_hall_conductivity_001.png :alt: Optical Hall conductivity $\sigma_{yx}$, Longitudinal $\sigma_{xx}$ :srcset: /api/gallery/large_scale/images/sphx_glr_plot_kpm_optical_hall_conductivity_001.png :class: sphx-glr-single-img .. rst-class:: sphx-glr-script-out .. code-block:: none disordered: Re sigma_yx(w = 0.05) = 1.0113 e^2/h absorption at 0.7-0.85 of the clean gap: 0.003 (clean), 0.178 (disordered) .. rst-class:: sphx-glr-timing **Total running time of the script:** (0 minutes 21.032 seconds) .. _sphx_glr_download_api_gallery_large_scale_plot_kpm_optical_hall_conductivity.py: .. only:: html .. container:: sphx-glr-footer sphx-glr-footer-example .. container:: sphx-glr-download sphx-glr-download-jupyter :download:`Download Jupyter notebook: plot_kpm_optical_hall_conductivity.ipynb ` .. container:: sphx-glr-download sphx-glr-download-python :download:`Download Python source code: plot_kpm_optical_hall_conductivity.py ` .. container:: sphx-glr-download sphx-glr-download-zip :download:`Download zipped: plot_kpm_optical_hall_conductivity.zip ` .. only:: html .. rst-class:: sphx-glr-signature `Gallery generated by Sphinx-Gallery `_